AEG 8000 OKOMIX User Manual Download

Page: 6 / 48

2.5

Service

• To repair the appliance contact an

Authorised Service Centre.

• Use original spare parts only.

2.6

Disposal

WARNING!

Risk of injury or suffocation.

• Disconnect the appliance from the

mains electrical and water supplies.

• Cut off the mains electrical cable

close to the appliance and dispose of

it.

• Remove the door catch to prevent

children or pets from becoming

trapped in the drum.

• Dispose of the appliance in

accordance with local requirements

for the disposal of Waste Electrical

and Electronic Equipment (WEEE).

INSTALLATION

WARNING!

Refer to Safety chapters.

3.1

Be prepared for

installation

It is recommended that

installation is carried out by

two persons.

3.2

The appliance is equipped

with ...

3.3

Unpacking

WARNING!

Use the gloves.

WARNING!

Remove all the packaging and the transit bolts before installing the

appliance.

www.aeg.com

Summary of Contents for 8000 OKOMIX

















































Search results

Summary of Contents for 8000 OKOMIX

Reviews:

Related manuals for 8000 OKOMIX

Brands by name

Popular brands

AEG 8000 OKOMIX, User Manual

Search results

Summary of Contents for 8000 OKOMIX

Reviews:

Related manuals for 8000 OKOMIX

Brands by name

Popular brands