33
Setting the hob for the new
gas type
1. If necessary, activate the hob by touching
the main ON/OFF Control
for about 3
seconds.
2. Touch the Timer Control
repeatedly to
select the auxiliary burner (front left burner)
on the burner selection display .
3. Touch the Increasing Control
and hold
the finger on it until the value 99 appears
on the time display. Then, touch the
Decrasing Control
and hold the finger
on it until the value 80 is displayed.
4. Then, touch the Increasing Control
until
83 is displayed. At this point, the hob is set
to the “
Gas Change
” mode and the current
gas setting appears on the display:
-
n0
stands for gas G20 (20 mbar)
-
n1
for gas G30 (28-30/37 mbar).
IMPORTANT:
setting
n2
does not allow
the hob to function.
