AEG 69802 G Operating Instructions Manual Download Page 3

3

it has been installed. Ensure there is a continuous air supply, keeping air vents in
good condition or installing a cooker hood with a venting hose.

!

When using the hob for a long period time, the ventilation should be improved, by
opening a window or increasing the extractor speed.

l Do not use this hob if it is in contact with water. Do not operate the hob with wet hands.

!

Ensure the control knobs are in the ‘OFF’ position when not in use.

!

When using other electrical appliances, ensure the cable does not come into contact

with the hot surfaces of the cooking appliance.

!

Unstable or misshapen pans should not be used on the hob as unstable pans can

cause an accident by tipping or spillage.

!

Never leave the hob unattended when cooking with oil and fats.

!

Never use plastic or aluminium foil dishes on the hob.

!

Perishable food, plastic items and areosols may be affected by heat and should not
be stored above or below the hob unit.

Service

!

This hob should only be repaired or serviced by an authorised Service Engineer and

only genuine approved spare parts should be used.

"

Environmental Information

!

After installation, please dispose of the packaging with due regard to safety and the

environment.

!

When disposing of an old appliance, make it unusable, by cutting off the cable.

!

The symbol 

 on the product or on its packaging indicates that this product may

not be treated as household waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic equipment. By ensuring
this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be
caused by inappropriate waste handling of this product. For more detailed information
about recycling of this product, please contact your local city office, your household
waste disposal service or the shop where you purchased the product.

Keep this instruction book for future reference and ensure it is passed on to

any new owner.

These instructions are only valid for countries whose identification symbols are shown on

the inside cover of this instruction booklet and on the appliance itself.

Summary of Contents for 69802 G





























Reviews: