AEG 68002 K-MN, Installation And Operating Instructions Manual

Page: 21 / 96

21
What to do if
…
Problem Possible cause Remedy
The appliance cannot be
switched on or is not oper-
ating More than 10 seconds have
passed since the appliance
was switched on Switch the appliance on
again.
The lock is switched on Switch off the lock (See
the section “Locking/un-
locking the control panel”)
The child safety device is
switched on Deactivate child safety de-
vice (See the section “Child
safety device”)
Several sensor fields were
touched at the same time Only touch one sensor field
Safety cut-out has been
triggered Remove any objects (pan,
cloths, etc.) that are lying
on the control panel.
Switch the appliance on
again
The cooking zones auto-
matically reduce the cook-
ing level to The sensor fields are partly
covered by a damp cloth or
with liquid Remove the cloth or the
liquid.
Reset the cooking level re-
quired.
The residual heat indicator
is not displaying anything The cooking zone was only
on for a short time and is
therefore not hot If the cooking zone is sup-
posed to be hot, call the
Customer Service Depart-
ment.
acoustic signal sounds, ap-
pliance switches off One or more sensor fields
have been covered for
longer than 10 seconds Uncover sensor field
Acoustic signal sounds and
appliance switches itself on
and after 10 seconds off
again The On/Off sensor field has
been covered up, e.g. by a
cloth Do not place any objects
on the control panel
Display is switching be-
tween two heat settings Power management is re-
ducing the power of this
cooking zone See the section “Switching
the power function on and
off”