AEG 6531 DG Instruction Book Download Page 4

4

Safety information

These warnings are provided in the 
interests of your safety. Ensure you 
fully understand them before installing 
or using the appliance. Your safety is of 
paramount importance. If you are 
unsure about the meaning of these 
warnings contact the Customer Care 
Department for assistance.

Installing

Do not install the hob if the ceramic 
glass is damaged or cracked.

This gas hob must be installed 
according to the instructions supplied. 
Any installation work must be 
undertaken by a qualified competent 
person.

Do not alter the specifications or 
attempt to modify the appliance in any 
way.

During Use

The gas hob is intended for domestic 
cooking only. It is not designed for 
commercial/industrial purposes.

Ensure that all the control knobs are in 
the OFF position when not in use.

Do not use the gas hob if it is damaged 
in any way, contact your local AEG 
Service Centre.

Never use plastic or aluminium dishes 
on the gas hob.

Never leave the gas hob unattended 
while deep fat frying, or heating fats 
and oils.

Child Safety

Young children must not be allowed to 
tamper with the gas hob or play with 
the controls.

The gas hob gets hot when it is in use. 
Children should be kept away until the 
gas hob has cooled.

Maintenance and Cleaning

Only clean this gas hob in accordance 
with the instructions given in this 
book.

Service

Repairs carried out by inexperienced 
persons may cause injury or serious 
malfunction of the appliance. Repairs 
must only be carried out by a 
qualified/competent person. Contact 
your local AEG Service Centre.

Disposal

Make the gas hob unusable by cutting 
off the cable

Dispose of any packaging material and 
old appliances at an authorised 
disposal sites.

17

Service

If the hob is not working correctly, please carry out the following checks before 
contacting your local AEG Service Centre.

IMPORTANT: If you call out an engineer to a fault caused by incorrect use or 
installation, a charge will be made even if the hob is under guarantee.

If after all these checks, your hob still does not operate correctly, contact your 
local AEG Service Centre.

In-guarantee customers should ensure that the above checks have been made as 
the engineer will make a charge if the fault is not a mechanical or electrical 
breakdown.

Please note that it will be necessary to provide proof of purchase for any in-
guarantee service calls.

Sympton:

 
There is no spark when lighting the 
gas

When the operating knob is released 
the gas ring goes out again

The gas ring burns unevenly

Solution

 
Check hob is connected to the 
electricity supply. Check the fuse and 
replace if necessery.

The operating knob has not been 
depressed long enough, or has not 
been depressed sufficiently.

Ensure the cover has been replaced 
correctly, e.g. after cleaning.  

Summary of Contents for 6531 DG











Reviews: