AEG 6410KF, Installation And Operating Instructions Manual, Page: 8 / 25

8
Operating the appliance
Switching the appliance on and off
Selecting the cooking zone
3
The decimal point is displayed by the selected cooking zone. Then a
heat setting must be set for this cooking zone within 6 seconds, other-
wise it must be re-selected.
Selecting the heat setting
3
After selecting the cooking zone, briefly release the sensor field .
3
After 6 seconds with no input the selection is cancelled and the deci-
mal point goes out. To set the required cooking zone again, make an-
other selection.
Control panel Display
Switch on Touch for 2 seconds.
¾
/ Decimal point flashes
Switch off Touch for 1 second
h
/ none
Control panel Display
Select Touch
¾
Decimal point illumi-
nates
Control panel Display
Increase Touch
¾
to
Ç
Decrease Touch
Ç
to
¾
Switch off Touch and at the same time
¾