background image

5.5 PowerBoost

This function activates more power for the

appropriate induction cooking zone,

depending on the cookware size. The

function can be activated only for a limited

period of time.

Touch   to activate the function for the

cooking zone.

The symbol turns red.

The function deactivates automatically.

For maximum duration values,

refer to "Technical data".

5.6 OptiHeat Control (3 step

Residual heat indicator)

WARNING!

/ /  As long as the

indicator is on, there is a risk of

burns from residual heat.

The induction cooking zones produce the

heat necessary for the cooking process

directly in the bottom of the cookware. The

glass ceramic is heated by the heat of the

cookware.

The indicators  / /  appear when a

cooking zone is hot. They show the level of

the residual heat for the cooking zones you

are currently using.
The indicator may also appear:

• for the neighbouring cooking zones even

if you are not using them,

• when hot cookware is placed on cold

cooking zone,

• when the hob is deactivated but the

cooking zone is still hot.

The indicator disappears when the cooking

zone has cooled down.

5.7 Timer

 Count Down Timer

Use this function to specify how long a

cooking zone should operate during a single

cooking session.

First set the heat setting, then set the

function.

1. Touch   to activate the function or

change the time.

The timer digits 

 and the indicators 

and   come on the display.   turns red,
and   turns white.

If the timer is not set, all indicators disappear

after 4 seconds.

2. Touch   or   to set the time (00 - 99

minutes).

After 3 seconds, the timer starts to count
down automatically. The indicators  ,  ,
and   disappear.   stays red.

When the time comes to an end, a signal
sounds and 

 flashes. To stop the signal,

touch  .

To deactivate the function: touch  . The
indicators   and   come on. Use   or 
to set 

 on the display. Alternatively, set

the heat level to 0. As a result, a signal

sounds and the timer is cancelled.

 CountUp Timer

You can use this function to monitor how

long a cooking zone operates.

Touch   twice to activate the function.

The indicator   turns red, the timer starts to

count up automatically.
To deactivate the function: touch  . When
the indicators light up, touch  .

 Minute Minder

You can use this function when the hob is

activated but no cooking zone operates.
To see the control panel, place a pot on a

cooking zone.

1. Touch  , until the indicator   turns red,

to activate the function.

2. Touch   or   to set the time.

ENGLISH

11

Summary of Contents for 61 D5A 04 AA

























Reviews: