background image

2

Safety advice

Read the following instruction 

carefully before using machine for the 

 rst time.

  This appliance is not intended for use 

by persons (including children) with 
reduced physical, sensory or mental 
capabilities, or lack of experience 
and knowledge, unless they have 
been given supervision or instruction 
concerning use of the appliance by a 
person responsible for their safety.

  Children should be supervised to 

ensure that they do not play with the 
appliance.

  The appliance may only be connected 

to a power supply whose voltage 
and frequency comply with the 

cations on the rating plate!

  The iron is not to be used if it has been 

dropped, if there are visible signs of 
damage on the iron or its cord or if it is 
leaking.

  The appliance must only be connected 

to an earthed socket. If necessary an 
extension cable suitable for 10 A can 
be used.

  If the appliance or the supply cord 

is damaged, it must be replaced by 

the manufacturer, its service agent or 

avoid hazard.

  The iron must be used and rested on a 

stable surface. When placing the iron 
on its stand, ensure that the surface on 
which the stand is placed is stable.

  Never leave the appliance unattended 

while connected to the supply mains.

  

and the mains plug withdrawn each 
time after use, before cleaning and 
maintenance.

  The plug must be removed from 

the socket outlet before the water 

lled with water.

  The mains cable must not come into 

contact with any hot parts of the 
appliance.

  Do not immerse the appliance in 

water or any other liquid.

 lling 

volume as indicated on the appliances.

 ne 

water quality / type of water that can 
be used with appliance.

  This appliance is intended for 

domestic use only. The manufacturer 
cannot accept any liability for possible 
damage caused by improper or 
incorrect use.

Ironing chart

Fabric

Temperature setting

Ironing recommendation

Acrylic

Dry iron on wrong side.

Acetate

Dry iron on wrong side while still damp or use spray to dampen.

Nylon & Polyester

Iron on wrong side while still damp or use spray to dampen.

Rayon

Iron on wrong side of fabric.

Viscose

Mainly dry iron. Steam can be used under manufacturer’s instructions.

Silk

 

Iron on wrong side. Use an ironing cloth to prevent shine marks.

Cotton blends

 

 br

   r

requiring lowest setting.

Wool & wool blends

 

Steam iron on wrong side or use ironing cloth.

Cotton

 

Dry iron while still damp or use spray to dampen. Use steam medium to 
high.

Corduroy

   

Steam iron on wrong side or use ironing cloth.

Linen

     

to “max”

Iron on wrong side or use ironing cloth to prevent shine marks, especially 
with dark colours. Dry iron while still damp or use spray to dampen. Use 
steam medium to high.

Denim

     

to “max”

Use maximum steam.

AEG IFU 5Safety Mahe 07.01.indd   16

08.01.11   00:40

Summary of Contents for 5SAFETY DB 8050









Reviews: