Operating Instructions
13
Rinse aid
Rinse aid ensures thorough rinsing, spot and streak free drying of
dishes and glassware.
Rinse aid can be added in one of two ways:
• If you use the dishwasher detergent and rinse aid separately, add the
rinse aid to the rinse aid container.
If you opt for this method, please note that
– the rinse aid container must never be empty.
– the amount of rinse aid dispensed must be set.
• If you use dishwasher detergent which already contains rinse aid, add
this to the detergent compartment.
If you opt for this method, please note that
– the rinse aid container must be empty in order to avoid dispensing
too much rinse aid.
– You can switch off the
H
control indicator. Otherwise, the
H
control indicator would stay on permanently owing to the empty
container.
1
Only use rinse aid specifically designed for domestic dishwashers. Never
fill the rinse aid container with dishwasher detergent or any other sub-
stance (e.g. vinegar essence) as this would damage the appliance.
To switch off the control indicator for rinse aid
0
1.
The appliance must be switched off.
2.
Press the softener and function buttons simultaneously and keep them
pressed.
3.
In addition press the ON/OFF button.
The LED indicators for the function and water softener buttons flash.
4.
Press the function button again.
The LED indicator for the function button flashes.
5.
The
L
indicator shows the current setting:
6.
Pressing the function button
switches the control indicator on or off.
7.
If the control indicator is set, press the ON/OFF button.
The setting for the control indicator is then stored.
The
L
indicator flashes:
Control indicator switched on (factory setting)
The
L
indicator does not flash:
Control indicator switched off
