AEG 12710 14710 Instruction Booklet Download

Page: 6 / 60

Safety instructions

Your safety is of paramount importance, please ensure you read this instruc-
tion book before installing or using this appliance.

General safety

• Repairs to the machine must be carried out only by qualified personnel.

Repairs carried out by inexperienced persons could cause injury or serious
malfunctioning. Contact your local AEG/ELECTROLUX Service Force Centre.

• Never start the machine if the mains cable is damaged or the control pan-

el or worktop are damaged allowing inner components to be accessible.

• Unplug the appliance before carrying out any cleaning or maintenance

operations.

• Never pull the mains cable to remove the plug from the socket; always take

hold of the plug itself.

• During high temperature wash programmes and during the drying cycle,

the door glass may get hot.

• Let the water cool down before carrying out emergency emptying or

before opening the door in an emergency.

Installation

• Follow the installation instructions

carefully

• Carry out a first wash without laundry (COTTONS 95, with half the amount

of detergent) in order to remove any manufacturing residue from the tub
and the drum.

132984531.qxd 28/11/2005 16.32 Pagina 6

Summary of Contents for 12710 14710





























































Search results

Summary of Contents for 12710 14710

Reviews:

Related manuals for 12710 14710

Brands by name

Popular brands

AEG 12710 14710, Instruction Booklet

Search results

Summary of Contents for 12710 14710

Reviews:

Related manuals for 12710 14710

Brands by name

Popular brands