English
33
No. Description
14
230 V low heat device connecting cable for mains
priority circuit
15
Connecting cable for remote control module
16
Earth cable with clip
17
Terminal connection cable (-) with rings (black)
18
Terminal connection cable (+) with rings (red)
19
Power button
20
MODE button
21
„Sleep Mode“ button (power save mode)
22
green power LED
23
green „Sleep Mode“ LED (power save mode)
24
orange mains priority circuit LED
25
red fault LED
INSTALLATION &
CONNECTION
Preparation
•
Before connecting the voltage converter you must
check the terminals on the vehicle’s battery. The
voltage converter must not be used with vehicles
where the positive terminal “+” is connected to a
metal part of the vehicle.
•
Only use the included cables with rings to con
-
nect to a 12 V direct current power supply (e.g.
automotive battery). If the included cables are too
short, you may also use insulated copper cables
from a speciality retailer.
•
use the shortest possible cable. The suitable
cable diameter must be selected based on the
length of the cable between the voltage converter
and power source. If you are unsure about some
-
thing, please contact your speciality retailer.
Control panel on voltage converter / Bluetooth®
remote control module
Remote control module
No. Description
1
230 V output (AC)
2
Data cable port (RC2) when using the Bluetooth®
remote control module
3
uSB port
4
Mounting rail
5
230 V output for extension cable (AC)
6
230 V input (AC) for mains priority circuit
7
Fuse
8
Data cable port
(remote control module)
9
Red connection (+) with terminal screw
10
Black connection (-) with terminal screw
11
Earth connection
12
Fan cover
13
230 V extension cable
MODE
ON / OFF
22
19
20
21
23 24 25
MODE
ON / OFF
19
21
22
23