background image

38

38

DISPOSAL

Never dispose of residual chemicals or contaminated rinsing solutions in 
waterways, drains, sewers, street gutters, or manholes.
Dispose of residual chemicals, contaminated rinse water, and used containers 
in accordance with local waste disposal regulations.

TRANSPORTATION AND STORAGE

Ensure that all parts are clean and dry. Follow the procedure described in this 
manual.
Turn off the product and remove the battery pack before storing or 
transporting.
For transportation, secure the product against movement or falling to prevent 
injury to persons or damage to the product.
Store the product in a cool, dry, and well-ventilated area that is inaccessible 
to children. Keep the product away from corrosive agents such as garden 
chemicals and de-icing salts. Do not store the product outdoors.

TRANSPORTING LITHIUM BATTERIES

Transport the battery in accordance with local and national provisions and 
regulations.
Follow all special requirements on packaging and labelling when transporting 
batteries by a third party. Ensure that no batteries can come in contact with 
other batteries or conductive materials while in transport by protecting 
exposed connectors with insulating, non-conductive caps or tape. Do not 
transport batteries that are cracked or leaking. Check with the forwarding 
company for further advice.

SYMBOLS

Safety alert

Read the instructions carefully before starting the product.

Wear eye protection.

Wear non-slip, heavy-duty gloves.

Wear a mask.

Wear non-slip safety footwear when using the product.

Wear protective clothing. For some chemicals, it is 
necessary to wear impermeable coveralls

Keep bystanders, especially children and animals away 
from the work area. Never spray in the direction of 
bystanders.

Do not expose the product to rain or damp condition.

Regulatory Compliance Mark (RCM). Product meets 
applicable regulatory requirements.

Do not use flammable liquids.

Drain all chemical solutions from the product after each 
use.

Do not dispose of electric tools together with household 
waste material. Electric tools and electronic equipment 
that have reached the end of their life must be collected 
separately and returned to an environmentally compatible 
recycling facility. Check with your local authority or retailer 
for recycling advice and collection point.

Summary of Contents for 0347235









































Reviews: