AEG 0036502, Original Instructions Manual

Page: 21 / 28

21
21
BATTERY AND CHARGER
Compatible battery pack
(not included)
Compatible charger
(not included)
L1815R
L1820R
L1825R
L1830R
L1840R
L1850R
L1860R
L1860B
L1860R-X5
L1890R
AL18G
AL1218G
BL1218
BLK1218
BL18DP-X5
BL18DP2-X5
Use AEG 18V battery and charger only
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious injury. Save all
warnings and instructions for future reference.
ANGLE GRINDER SAFETY WARNINGS
Safety Warnings Common for Grinding, Wire Brushing or
Abrasive Cutting-Off Operations:
a) This power tool is intended to function as a grinder,
wire brush or cut-off tool. Read all safety warnings,
instructions, illustrations and specifications provided
with this power tool. Failure to follow all instructions listed
below may result in electric shock, fire and/or serious injury.
b) Operations such as sanding or polishing are not
recommended to be performed with this power tool.
Operations for which the power tool was not designed may
create a hazard and cause personal injury.
c) Do not use accessories which are not specifically
designed and recommended by the tool manufacturer.
Just because the accessory can be attached to your power
TECHNICAL DATA CORDLESS ANGLE GRINDER
BEWS18BLX230
Rated voltage
18V
Rated speed 5500 min
-1
Thickness of grinding wheel 6 mm
Grinding wheel diameter
230 mm
Thread of work spindle M 14
Accessory type
Grinding wheel Type 27
Cutting wheel Type 41 or Type 1 (Flat disc)
Wire brush
Type 6
Weight - not including battery pack 4.8 kg
Weight according EPTA-Procedure 01/2003 (Li-Ion 1 x 1,5Ah)
5.2 kg
Weight according EPTA-Procedure 01/2003 (Li-Ion 2 x 9,0Ah)
7.1 kg
Measured values determined according to EN 60745. Typically, the A-weighted noise levels of the tool are:
A-weighted sound pressure level
L
p
= 86 dB(A)
Uncertainty K 3 dB(A)
A-weighted sound power level L
W
= 97 dB(A)
Uncertainty K
3 dB(A)
Wear ear protectors.
The vibration total values (triaxial vector sum) determined according to EN 60745:
Vibration emission value
Surface grinding (Li-Ion 1 x 1,5Ah…2 x 9,0Ah): Vibration emission value
a
h,AG
= 7.0 m/s
2
Uncertainty K 1.5 m/s
2
Disk sanding (Li-Ion 1 x 1,5Ah…2 x 9,0Ah): Vibration emission value a
h,DS
≤ 2.5 m/s
2
Uncertainty K
1.5 m/s 2
For other applications, e.g. Abrasive Cutting-Off Operations or Wire Brushing other vibration values could occur.
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure. The
declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications,
with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it
is running but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work patterns.