AEG Electrolux U32098 FM4863-an, Installation And Operating Instructions Manual

Page: 19 / 32

19
Installation Instructions
Safety instructions
The laws, ordinances, directives and standards in force in the country of
use are to be followed (safety regulations, proper recycling in accord-
ance with the regulations, etc.)
Installation may only be carried out by a qualified electrician.
The minimum distances to other appliances and units are to be ob-
served.
Anti-shock protection must be provided by the installation, for exam-
ple drawers may only be installed with a protective floor directly un-
derneath the appliance.
The cut surfaces of the worktop are to be protected against moisture
using a suitable sealant.
The sealant seals the appliance to the work top with no gap.
Avoid installing the appliance next to doors and under windows. Other-
wise hot cookware may be knocked off the rings when doors and win-
dows are opened.
1
WARNING!
Risk of injury from electrical current.
•
The appliance must be free of voltage when installing and uninstall-
ing.
•
Observe connection schematic.
•
Observe electrical safety rules.
•
Ensure anti-shock protection through correct installation by a quali-
fied installer.
•
The appliance must be connected to the electrical supply by a quali-
fied electrician.
1
Important
Risk of injury from electrical current.
Loose and inappropriate plug and socket connections can make the ter-
minal overheat.
•
Have the clamping connections correctedly installed by a qualified
electrician.
• Use strain relief clamp on cable.
• This appliance’s mains cable is fixed directly to the board. If the mains
cable is damaged, it must only be replaced by a qualified ecletrician
or our Customer Care Department.