background image

 
Adjusting the tone of the electronic timer alarm. 

 
The tone is adjusted simply by pressing the minus button. Each time it is pressed the tone will 
change. 
There are 3 different tones from which you can select. 
The electronic timer will store in its memory the last tone activated 

Manual cooking 

 
Once the time of day is set the POT symbol will be displayed. The oven is now in manual 
operation mode ready for you to select the desired cooking function and temperature 

 

 

Automatic cooking modes

 

(

Based on setting the duration “DUR”)

 

 

Set function and temperature to the desired position 
 
For example: if you wish to cook for 45 minutes. Press the MODE button minimum for 4 seconds. 
Press the MODE button again. The AUTO symbol is flashing and the display shows 

“dur”. 

The 

display automatically switches over between 

"dur"

 display and 0:00. During this time you can set 

the duration time of 45 minutes by pressing the PLUS button (use MINUS button should you over-
shoot the required time). Release and the display will return to the normal time of day after 7 
seconds. The AUTO symbol will also appear indicating that you have set the automatic cooking 
function. 
The oven will operate for 45 minutes only, turn off automatically and the alarm will sound. The 
AUTO symbol is flashing and the POT symbol will disappear. The alarm will turn off after pressing 
the MODE button. 
If you hold the MODE button down longer than 4 seconds the oven will return to the normal 
cooking mode. 
 
If further cooking is required, either leave on manual or repeat the above setting sequence. 
 

Note: If you have not turned the function and thermostat setting off, your oven will now continue 
to operate manually. The AUTO symbol will disappear and the POT symbol will reappear. 

 
Based on setting a cook stop time 

 

Set the function and thermostat control to the desired position 

For example: if you commence cooking and decide you would like the oven to turn off at 
6.00pm. Press the MODE button minimum for 4 seconds. Press the MODE button two 
times again. The AUTO symbol is flashing and the display shows “End”. The display 
automatically switches over between "End" and time of day. During this time you can set 
the cooking stop time to 6.00pm, i.e.18:00 on the 24 hour clock, by pressing the PLUS 
button (use MINUS button should you over-shoot the required time). Release and the 
display will return to the normal time of day after 7 seconds. The AUTO symbol will also 
appear indicating that you have set the automatic cooking function. 

The oven will continue to cook until 18:00 (6.00pm) and then switch off and the alarm will 
sound. The AUTO symbol is flashing and the POT symbol will disappear. The alarm will 
turn off after pressing the MODE button. 

If you hold the MODE button pressed longer then 4 seconds the oven will return to the 
normal cooking mode. 

 
If further cooking is required, either leave on manual or repeat the above setting sequence. 
 

Summary of Contents for SIC 76



























Reviews: