29
Drying results unsatis-
factory.
Wrong programme selected.
Select a different programme
the next time you dry (see sec-
tion “Overview of pro-
grammes”).
Fluff filter blocked.
Clean fluff filter.
Heat exchanger blocked
with fluff.
Clean heat exchanger.
Incorrect amount of wash-
ing.
Observe recommended loads.
Ventilation slots in base area
covered up.
Uncover ventilation slots in
base area.
Residue on inside surface of
drum or drum paddles.
Clean inside surface of drum
and drum paddles.
Adjust using the
¤
DRY LEVEL
option (see section “Drying,
Setting options”.)
Display shows:
PLEASE CLOSE THE
DOOR.
Door not closed properly.
Close door - there should be
an audible click.
Restart the programme.
Door cannot be
opened with the DOOR
[DEUR] button.
Mains plug disconnected.
Plug in at mains socket.
Programme knob in OFF
(UIT) position.
Set programme. Door can be
opened at any time by exert-
ing pressure on the door.
Door cannot be closed.
Fine filter not in place and/
or large mesh filter not in-
serted correctly.
Install fine filter and/or snap
large mesh filter into place.
Display shows:
SELECTION ERROR.
The selected function can-
not be combined with oth-
er programme settings.
Select another function.
Drum light is not
working.
Programme knob in OFF
(UIT) position.
Turn programme knob to
LIGHT or to any programme.
Defective light bulb.
Replace light bulb (see next
section).
Programme stops mid-
way, display shows:
THE TANK IS FULL,
PLEASE EMPTY.
Condensed water container
is full.
Empty condensed water con-
tainer, then start programme
with the START/PAUSE (START/
PAUZE) button.
Problem
Possible cause
Remedy
Summary of Contents for LAVATHERM 58820
Page 1: ...LAVATHERM 58820 Condensation dryer User Information...
Page 38: ...38...