AEG Electrolux LAVAMAT 60640, User Manual

Page: 16 / 48

Incorrect option selection
If an option which is not compatible with
the set wash programme is selected, the
message
Err is displayed for about 2
seconds and the yellow Start/Pause light
start flashing.
Alarm codes
In the event of operating problems, some
alarm codes can be displayed, for example
E20 (see paragraph «Something not
working»).
End of programme
When the programme has finished a
flashing zero is displayed, the
pilot
light and the Start/Pause light go out and
the door can be opened.
Select the Start/Pause
To start the selected programme, press the
Start/Pause button; the corresponding red
pilot light stops flashing.
The washing pilot light wash is on to
indicate that the appliance starts operating.
The door pilot light door is on to
indicate the door is locked.
To interrupt a programme which is running, depress the Start/Pause button: the
corresponding red pilot light starts to flash.
To restart the programme from the point at which it was interrupted, press the
Start/Pause button again .
If an incorrect option is selected, the integrated yellow pilot light of the
Start/Pause button flashes for 3 times the message Err is displayed for about 2
seconds.
16 Use
192998381 gb.qxd 9/8/2008 10:12 AM Page 16