How to run a wash cycle
13
PAUSE
and then DELAY START
. Press START/PAUSE
to start the
cycle.
• To change the timer delay period, you must go through the STOP position
and reprogram your cycle.
The lid will be locked during the delayed start time. If you need to open it, you
must first pause the appliance by pressing the START/PAUSE
pushbutton.
After closing the lid again, press the START/PAUSE
pushbutton.
If you use a liquid detergent for a wash cycle with start delay, use a dosing
ball that you place directly in the drum and select a programme without pre-
wash. If you want to do a pre-wash at the same time as a start delay, please
use a powder detergent.
Start of the programme
1.Check whether the water inlet tap is open.
2.Press the START/PAUSE
button. The corresponding indi-
cator lights up in red. The LID
indicator lights up (door loc-
ked).
It is normal for the programme selector to remain stationary during the cycle.
If a delayed start has been selected, the countdown appears on the display
(hour by hour, then 90, and minute by minute from 60 min).
Programme sequence
The WASH indicator lights up when the appliance
is in progress.
Adding washing during the first 10 minutes
1.Press the START/PAUSE
pushbutton. The corresponding indicator flashes
in red.
2.The lid can only be opened around 2 minutes after the washing machine has
come to a stop. The LID
indicator lights off.
3.Put the washing in and close the lid.
4.Press the START/PAUSE
button again to continue the cycle.
Modifying the programme in progress
Before making any changes to the current programme, you need to pause the
washing machine by pressing the START/PAUSE
pushbutton. If the
modification is not possible, “Err” flashes in the display window and the
