Display message and malfunction
Possible cause and solution
• intermitted audible signal
• message
OPEN THE TAP
in the display
• point-shaped optical signal flashing
The dishwasher does not fill with water
• The water tap is blocked or furred with lime
-
scale.
Clean the water tap.
• The water tap is turned off.
Turn the water tap on.
• The filter (where present) in the threaded hose
fitting at the water inlet valve is blocked.
Clean the filter in the threaded hose.
• The water inlet hose has not been correctly
laid or it is bent or squashed.
Check the water inlet hose connection.
• intermitted audible signal
• message
DRAIN BLOCKED
in the display
• point-shaped optical signal flashing
The dishwasher will not drain
• The sink spigot is blocked.
Clean out the sink spigot.
• The water drain hose has not been correctly
laid or it is bent or squashed.
Check the water drain hose connection.
• intermitted audible signal
•
appears in the display
• point-shaped optical signal flashing
Anti-flood device is activated
• Close the water tap and contact your local
Service Force Centre.
• intermitted audible signal
• message
SPRAY ARM BLOCKED
in the dis
-
play
• point-shaped optical signal flashing
• Open the door carefully.
• Arrange dishes and cutlery in the baskets so
that the upper spray arm can rotate freely.
• Close the door.
The programme does not start.
• The dishwasher’s door has not been properly
closed. Close the door.
• The main plug is not plugged in. Insert the
main plug.
• The fuse has blown out in the household fuse
box.
Replace the fuse.
• Delay start has been set.
If dishes are to be washed immediately, cancel
the delay start.
Once these checks have been carried out, switch on the appliance: the programme
will continue from the point at which it was interrupted.
If the malfunction or fault code reappears contact the Service Force Centre.
What to do if…
33
