13
Example:
In this case, both the
drain and the spin (at
the speed provided for
the selected type of
fabric) will be
performed.
This button allows you also to select special
programmes, such as
RINSES
,
SPIN
and
DRAIN
.
•
If the machine is already switched on
because it
has just performed a washing programme, proceed
as follows:
- depress RESET once or repeatidly to cancel the
previously performed programme (three blinking
dashes will appear on the display);
- select the type of fabric by means of the relevant
button;
- select the special programme:
•
RINSES
Depress RESET
once
, the pilot light WASH
goes out.
•
SPIN
Depress RESET
twice
, the pilot lights WASH
and RINSES go out.
•
DRAIN
Depress RESET
three times
, the pilot lights
WASH, RINSES and SPIN go out.
Example:
In this case the
machine will perform
the rinses and spin.
•
If the machine is switched off:
- depress ON/OFF button to switch it on;
- select the type of fabric by means of the relevant
button;
- select the special programme as previously
described.
wash
rinses
spin
drain
prewash
wash
rinses
spin
drain
prewash
11 DELAY button
This button makes it possible to delay the starting of
the programme by up to 24 hours. The delay you
have selected is shown on the display for about 3
seconds; afterwards, the duration of the programme
reappears.
You must select this option
after
you have set the
programme and
before
you press the
START/PAUSE button.
The time value shown on the display will decrease
by one unit every hour.
You can change the delay time at any moment
,
before you press the START/PAUSE button.
If you have already pressed the START/PAUSE
button, and you wish to
change
or
cancel
the delay
time, proceed as follows:
• set the washing machine to PAUSE by pressing the
START/PAUSE button;
• press the DELAY button until the display shows the
desired delay time or
• press the DELAY button once, to erase the delay
time. The display will indicate “0h”.
• press the START/PAUSE button again.
Important!
The door will be locked throughout the delay time
(DOOR LOCKED light lit).
If you need to open the door, you must first set the
washing machine to PAUSE by pressing the
START/PAUSE button. After you have closed the
door, press the START/PAUSE button again.
12 Programme phase indicator
lights
When you select a programme, the lights relevant to
the phases that form the programme light up.
After you have started the programme, only the light
relevant to the phase that is currently being carried
out will remain lit.
wash
rinses
spin
drain
prewash
132998250.qxd 1/14/02 8:53 AM Pagina 13 (Nero/Process Black pellicola)
