75
Carry out calibration with the hob off, at normal ambient tempera-
ture and in the absence of an appreciable amount of steam:
-
press push button
A
and set the hood
OFF
(
A
key OFF)
-
press push buttons
A
and
D
simultaneously for 3 secs. The
hood emits a sound signal to indicate calibration taking place.
Sensors test
When functioning in
automatic
, the system continuously tests the
efficiency of the
sensors
. In case of damage, it signals the fault,
making the
D
push button flash the word
SENSOR
.
Contact
technical assistance.
In this situation the hood can, in any case, be used in the
manual
mode
.
Safety procedure
Self-activation of automatic
SAFETY
functioning in
particular
conditions
:
if the sensors
reveal an excessive increase in
temperature
, even if the hood is
in manual functioning mode,
the system self selects
automatic functioning
and the extraction
motor starts. The hood can be turned off by pressing push button
A
.
E
- Light ON/OFF
Should the hood or the controls fail to operate: disconnect the power
supply for at least 5 seconds, then turn the hood back on again.