41
Cleaning and care
Putting the door glass back
1.
From above insert the door glass at an an-
gle into the door profile at the bottom
edge of the door and lower it.
2.
Take hold of the door trim (B) at each side,
position it on the inside edge of the door
and plug the door trim(B) into the upper
edge of the door.
3
On the open side of the door trim (B) there
is a guide bar (C). This must be pushed
be-
tween
the outer door panel and the guide
corner(D).
The clip seal (E) must be snapped in.
Summary of Contents for B1180-5
