Control panel
Display
To set the heat
setting
Touch the desired heat setting, if necessary, correct
up or down
/
to
Switch off
Touch
Locking/unlocking the control panel
The control panel, with the exception of the “On/Off” sensor field, can be locked at any time
in order to prevent the settings being changed e.g. by wiping over the panel with a cloth.
Control panel
Display
To switch on
Touch
(for 4 seconds)
To switch off
Touch
previously set heat setting
When you switch the appliance off, the locking function is automatically switched off.
Turning the STOP+GO function on and off
The STOP+GO function simultaneously toggles all active cooking zones to keep-warm mode
then back to the heat setting they were at before
Control panel
Display
To switch on
Touch
To switch off
Touch
Previous heat setting (not automatic warm-up or power
function)
STOP+GO does not stop timer functions.
STOP+GO controls the entire control panel apart from the sensor field .
Using the automatic warm-up function
All cooking zones are equipped with an automatic warm-up function. When setting a heat
setting using the automatic warm-up function, the cooking zone switches to full power
for a certain amount of time and then automatically switches back to the heat setting set.
Step
Control Panel
Display
1.
Touch
2.
Move your finger down
from to select the de
-
sired heat setting between
and
/ after 5 seconds . As long as is
displayed, the appliance works at full power. After
the automatic warm up is completed, the heat
setting
/ is displayed again.
The length of time that the automatic warm up function operates depends on the heat
setting selected.
Heat setting
Length of the automatic warm up [min:sec]
0:12
Operating the appliance
7
