AEG Electrolux 78001KF-N, Installation And Operating Instructions Manual

Page: 10 / 32

10
Switching the STOP+GO function on and off
The STOP+GO function simultaneously switches all cooking zones that
are switched on to the keep warm setting and then back to the heat
setting that was previously set. This function can be used to briefly in-
terrupt and then continue the cooking process e.g. to take a telephone
call.
3
Timer functions are not stopped by STOP+GO.
3
STOP+GO locks the whole control panel except the sensor field .
Using the automatic warm-up function
All cooking zones are equipped with an automatic warm-up function.
The automatic warm-up function sets the cooking zone to the highest
setting for a certain period of time and then automatically switches
back to the cooking setting that was originally set.
3
If during the automatic warm up
a
a higher heat setting is selected,
e.g. from
Á
to
Ã
, the automatic warm up is adjusted.
Control panel Display
To switch
on Touch STOP+GO
u
To switch
off Touch STOP+GO heat setting that was previ-
ously set (not automatic
warm up function)
Step Control panel Display
1. Setting the maximum setting
Ç
/
p
2. Place to one side for a moment
Ç
/
p
3. touch
a
4. touch in order to set the de-
sired cooking setting
Æ
until
¿
/
u
after 3 seconds
a