Messwerte
2
1
①
Measurement name
②
Measurement with units
The following measurements are displayed:
■
Battery charge current
: current flowing from controller to bat-
tery
■
Battery voltage
■
Ext. Bat. Sens. voltage
: battery voltage measured via the bat-
tery voltage sensor cable
■
PV voltage 1
: Voltage provided by solar module 1
■
PV voltage 2
: Voltage provided by solar module 2
■
Total PV power
: Total power provided by solar modules 1
and 2
■
PV power 1
: Power provided by solar module 1
■
PV power 2
: Power provided by solar module 2
■
Operating hours
: Number of operating hours since initial com-
missioning
Note
The controller is not approved as a calibrated measuring device.
Information bar
5
4
3
2
1
①
Date
②
Symbol for unacknowledged event messages; more informa-
10.1, p. 31 onwards.
③
For future functions.
④
Symbol for the charging function presently being executed:
E
(Equal charge)
F
(Float charge)
B
(Boost charge)
⑤
Time
8.3 Display of special states
n
When the inverter is processing large amounts of data it is not able to process any user input.
This is indicated by an animated sun symbol:
n
The backlight blinks red when faults occur. An event message is also displayed.
8.4 General operation
1. If necessary, press
ESC
for 1 s to show the basic settings of
the status display.
2. Press
sr
to display the measurements.
GB
749.126 | M02 | 2013-11-13
25
Summary of Contents for Tarom MPPT 6000
