background image

3

73.976 | 09.47

EN

Introduction

Steca STM 80, STM 81, STM 860 and STM 861 are battery chargers for lead-

acid batteries. The main areas of application are battery charging rooms, work-

shops, depots, and the power supply of car parks.
Steca STM 80, STM 81, STM 860 and STM 861

 

ensure a high battery service 

life and minimum recharging times by means of a microprocessor-controlled 

charging process.
The series of battery chargers covers the following variants:

Output voltage 1 V, 4 V, 36 V or 48 V.
Setting of the battery capacity via a potentiometer or via menu-driven but-

tons with LCD display (exception: STM 860)
Casing protection degrees IP 0 or IP 65

Type

Output voltage

Output current

Control element

Protection 

degree

STM 820

1 V/50 A

1 V

50 A

Potentiometer

IP 0

4 V/35 A

4 V

35 A

36 V/5 A

36 V

5 A

48 V/18 A

48 V

18 A

STM 821

1 V/50 A

1 V

50 A

LCD display

IP 0

4 V/35 A

4 V

35 A

36 V/5 A

36 V

5 A

48 V/18 A

48 V

18 A

STM 860

1 V/50 A

1 V

50 A

IP 65

4 V/35 A

4 V

35 A

36 V/5 A

36 V

5 A

48 V/18 A

48 V

18 A

STM 861

1 V/50 A

1 V

50 A

LCD display

IP 65

4 V/35 A

4 V

35 A

36 V/5 A

36 V

5 A

48 V/18 A

48 V

18 A


1  About this manual

These operating instructions are part of the product.

Read these operating instructions carefully before use,
keep them near the product during its entire service life,
and pass them on to any future owner or user of this product. 

1.1  Applicability

These instructions describe the function, operation, installation and dismantling 

of the battery chargers.

1.2  Users

These operating instructions are intended for end customers. A technical expert 

must be consulted in cases of uncertainty.

1.3  Description of symbols

1.3.1  The structure of the warning notices

 SIGNAL WORD

Type, source and consequences of the danger!

Measures for avoiding danger

1.3.2  Danger levels in warning notices

Danger level

Probability of occurrence

Consequences of non-compliance

 DANGER

Imminent threat of danger

Death, serious bodily injury

 WARNING

Possible threat of danger

Death, serious bodily injury

 CAUTION

Possible threat of danger

Minor bodily injury

CAUTION

Possible threat of danger

Property damage

Summary of Contents for Stecamat STM 820





















Reviews: