Aeca StecaGrid Vision, Manual, Page: 38 / 124

38
734.144 | 10.48
EN
5.1.3 Cable connections
Up to 0 inverters can be connected to the remote display. Communication between
the remote display and the inverters takes place using a wired connection over an
RS485 bus. Information on the cables to be used is provided in the StecaGrid 10000 3ph
manual, issue Z04 or later.
5.2 Function
5.2.1 Operating buttons
Button Function

( UP button) Scrolling up through the menu
Increases a selected value •
•
SET
Enters a selected submenu
Confirms an entered setting •
•
ESC
Jumps one menu level upwards
Discards an entered setting •
•

( DOWN button) Scrolling down through the menu
Decreases a selected value •
•
Tab. 5: Functions of the operating buttons
5.2.2 Settings
Date / time of the internal clocks of the remote display and inverters
Country: Setting the country also defines the local regulations for feeding electric-
ity into the mains grid. This setting affects all connected inverters and, due to mains
grid feed safety regulations, this setting can be performed only once.
Addresses of the inverters
Language used for displaying text messages in the remote display
Contrast / illumination of the display
5.2.3 Display
The following information stored in the inverters can be read on the remote display:
Output and yields
of all inverters
of individual inverters
Numerical and graphical display
•
•
•
•
•
•
–
–
•