
MOUNTING AND MAINTENANCE
INSTRUCTION
Q5 AS-OP-S-SM45-SP_IM_ENG - Rev.13 of 16/09/16
Pag. 3 of 4
AS - OP - S - SM45 - SP
Made in Italy
CPO White
MHL
SHP
White Son
140W
100W
150W
250W
400W
100W
150W
250W
400W
100W
Optic
Optic
Optic
Optic
Optic
Optic
Optic
Optic
Optic
Optic
E27
NO OP
NO OP
E40
NO OP
NO OP
NO OP
NO OP
NO OP
NO OP
NO OP
NO OP
FC2
NO SP
NO SP
NO SP
NO SP
G12
NO OP
NO OP
G22
NO OP
PG12-1
NO OP
PGX12-2
NO OP
PGZ12
NO OP
RX7S
NO SP
RX7S-24
NO SP
NO SP
0.10 m
2
Form Factor: 1,2
Area exposed to the wind
0.29 m
2
A
- Ballast
L
- Lamp
f
– Fuse
(500V)
C
- Capacitor
Z
- Ignitor
WIRING SCHEME
SHP - White Son
MHL
WIRING SCHEME
Cosmopolis
Fluorescenti Compatte
L
N
L
Out
A
In
Model
Power [W]
Peso [gr]
Empty
With control gear
100W
9500
13000
150W
14000
250W
15000
400W
17000
ELECTRICAL LINE CONNECTION
< 2 5 mm
6
7 mm
In order to insure double insulation
characteristic of the feeder cable, we
would advise that you first secure the
feeder cable to the internal cable
clamp, remove approximately 25mm of
external sheathing, and 6mm of
sheathing from the internal wires.
ATTENTION
a) The luminaire can be installed close to flammable surfaces.
b) High voltage danger with RX7 and FC2 lamp holder.
c) Outdoor luminaire for Ta=30°C.
d) Class II luminaires must be installed in such a way that it is impossible for any exposed metal part to come in contact with
electrical components.
e) Luminaires for Metal Halide lamps must be always complete with its protective screen.
f)
For luminaires with Metal Halide lamps, damaged protective shields can only be replaced with original AEC Illuminazione’s
replacement shields.
g) On luminaires for Metal Halide lamps use only UV Stop protected lamps.
h) This luminaire has been designed and manufactured following all relevant standards. The installation must be done by
experienced personnel and following the instructions.
The present instruction paper has to be kept for any future maintenance operation on the luminaire.
Non compliance with the above will automatically release AEC Illuminazione Srl from any responsibility.