Specifications:
Operating Principle:
Directional Pattern:
Frequency Range:
Maximum SPL:
Sensitivity:
Rated Impedance:
Rated Load Impedance:
Phantom power:
Polarity:
Off Axis Response
Transducer Element
Material:
Thickness:
Width:
Length:
Microphone Dimensions:
Height:
Width:
Depth:
Weight:
Shipping weight:
Connector:
Manufactured by AEA Ribbon Mics & Preamps
1029 N. Allen Ave. Pasadena, California 91104, USA
Tel: +626-798-9128 Fax: +626-798-2378 www.ribbonmics.com
For more information contact:
Options
M Matched stereo pair
Accessories
Included:
Storage/shipping case, microphone stand clip,
custom protective mic sleeve, user manual
Limited Warranty:
One year parts and labor, shipping not included.
Extended to three years if product is registered
with AEA.
1.38”
8.83”
1.62”
10k
5k
2k
1k
500
200
200
20k
Hz
10.0
5.0
0.0
-5.0
-10.0
-15.0
AEA N22 Frequency Response
)r
Bd(
eg
atl
oV t
upt
u
O
Frequency (Hz)
Data below 200 Hz omitted due to measuring room restrictions.
0 dBr is equivalent to 6.2 mV/Pa at 1 kHz.
Normalized to 0 dBr at 1 kHz.
0
-6
-12
-18
-24
-30
dB
30°
60°
90°
120°
150°
180°
-150°
-120°
-90°
-60°
-30°
10000Hz
4000Hz
2000Hz
1000Hz
500Hz
200Hz
Directivity
Pressure gradient transducer
Bidirectional
< 20 Hz to 20 kHz
141 dB SPL (1% third harmonic > 1 kHz)
6.2 mV/Pa (at 1 kHz, no load)
92
Ω
broadband
1.0 k
Ω
or greater
P48 phantom power, 7 mA
Pin 2 high for positive pressure at the
front of the microphone.
Bidirectional
Level changes with angle of incidence, but
frequency response is consistent.
Up to 90 dB rejection at 90 / 270 degrees
Pure aluminum corrugated ribbon
1.8 µm
0.185 in (4.7 mm)
2.35 in (59.7 mm)
8.83 in (32.4 cm)
1.62 in (11.7 cm)
1.62 in (9.5 cm)
12 oz (335 g)
1 lb 13 oz (810 g)
XLR-3M
