AIR50-2230A Operation Manual
AIR50-2230A Transport and Handing
11
Figure 4-2 Handling Posture of AIR50-2230A Manipulator
Warning
◼
Manipulator shall be handled in strict accordance with the posture in the
table, otherwise it may fall due to unstable center of gravity.
◼
During the long distance transportation, the operator shall add wood
support between the forearm and the casting of J2 to reduce the impact
load during the transportation. A soft cushion should be used between
the wood and the support point to prevent the wood from scratching the
surface of the machine
4.2
Handing Dimensions
Three views of manipulator during the handling process are as shown in Figure
4-3 (it shall be noted that the actual dimensions may be slightly larger than
those in the figure):
：
35°
60°
10°
