LED Display
Program
Start
Speed -
The emergency
stop switch
Speed +
Stop
Mode
Speed selec�on area
1. Insert the plug, put the safety key into the control panel
, open the power switch, full screen display 1
second after the beep sound to enter standby.
2. In the manual standby mode initially: SPEED display 0.0； TIM
E display 0:00; CAL display 1; DIST
display 0.0; CAL display 0;
3. In the manual standby mode, press the MODE key, you can res
pectively selected the mode: normal,
preset time or preset distance. If choose count up timer, dis
play “：” flash display; and count down,
display the static status.
A. According to the normal, the time and distance are both c
ount up, when the time to 60 minutes, it’s
stop.
B. According to the preset time, the original time is 30:00, a
nd the speed can be adjusted from 5:00---99:00,
and the time count down until 0, the machine stop.
C. According to the preset distance, the original distance is
1.00, you can adjust the speed from
0.50-1.00-1.50---99.5，each additional distance is 0.5km, DIST i
s count down until 0.
4. In the standby mode, click the program key, its P1-P12 aut
o program for choice, the time will show by
count down, original time is 30：00, you can adjust the time fr
om 5:00---99:00 by speed +/- key.
5. In the standby mode, all of shortcut key are useless, if cli
ck the stop key, all will come back to manual
standby status.
6. When running all mode, it must be have 3 seconds count dow
n (speed display), and buzzer 3seconds. In
this mode, the mode key and program key is invalid.
7. In manual operation mode, you can adjust the speed from1.0--
-10.0. original is 1.0,you also can choose
speed (2KM，4KM，6KM，8KM and 10KM) by speed shortcut key.
