”
STEPS TO TAKE A BLOOD PRESSURE
MEASUREMENT
After you are in a comfortable position, press
the “ON/OFF” button. The device will verify itself showing all “8s”,
then LCD will show “00.” The cuff will inflate, then deflate, the results
will then be displayed.
PROGRAMMING DATE AND
TIME
★
Press the
“SET”
button for 5
seconds while the device is turned off, the number of the YEAR will begin to blink on
the LCD display. Press the
“
”
button to advance the YEAR displayed. When you
have reached the correct year, press the
“SET”
button and release.
(Do not hold
the
“SET”
button down during programming.)
When the
“SET”
button is pressed
and released, the YEAR will stop blinking and the MONTH will begin to blink. Press
and release the
“
”
button until the desired month is reached. Repeat this
process to set the
DAY, HOUR, MINUTES.
NOTE: When the number that you wish to set – i.e. YEAR, MONTH, DAY, HOUR, MINUTE - is
blinking, each time you press and release the
“
”
button, the number will increase by
one. Each time you depress the “
“ button, the number will decrease by one. ***Time is
displayed using a 24 hour clock. AM/PM are not displayed
.
10
