5
5. Mount your camera onto the wall and connect all cables.
Lead tapping screws through the guide holes in the base and fix them on the wall by using a
screwdriver.
6. Adjust the monitoring direction.
(1) Adjust the opening of the universal joints as required.
(2) Rotate the spherical hinge of the camera to get the desired monitoring direction.
(3) Tighten the locknut.
NOTE!
The preceding installation process is for concealed installation, during which holes are punched
on the wall and cables are penetrated into the wall. If open installation is adopted, cables are
not penetrated into the wall but threaded out from the outlet on one side of the base.
5
Stratup
After you have installed the device, connect one end of the power adapter (purchased
separately) to power supply, and then connect the other end to the power interface to start up
the device.
