background image

 

 

 

Do not overbend the cables during the installation, otherwise, poor cable contact 
may cause malfunction. 

 

When connecting to an external interface, use an existing connection terminal, 
and  ensure  that  the  cable  terminal  (latch  or  clamp)  is  in  good  condition  and 
properly fastened. Ensure that the cable is not tense during mounting, with a 
proper margin reserved to avoid poor port contact or loosening caused by shock 
or shake. 

 

During transportation, special attention is required to protect the transparent 
dome cover from friction, scratch and stain, etc.  Do not remove the protective 
film from the cover until mounting is finished. Remove the protective film before 
powering on the device. 

 

Make  sure  the  wall  or  ceiling  is  strong  enough  to  support  the  weight  of  the 
camera. If dust falls during mounting, take off the dome cover and keep it away 
from dust. Install the dome cover after the base is installed. 

 

Contact professionals for maintenance information. Do not attempt to dismantle 
the  device  by  yourself.  We  shall  not  assume  any  responsibility  for  problems 
caused by unauthorized repair or maintenance. 

2.2  

Maintenance 

 

If there is dust on the front glass surface, remove the dust  gently using an oil-
free brush or a rubber dust blowing ball.  

 

If there is grease or a dust stain on the front glass surface, clean the glass surface 
gently from the center outward using anti-static gloves or an oil-free cloth. If the 
grease or the stain still remains, use anti-static gloves or an oil-free cloth dipped 
with detergent and clean the glass surface gently until it is clean. 

 

Do  not  use  organic  solvents  (such  as  benzene  and  alcohol)  to  clean  the 
transparent dome cover. 

3

 

Appearance 

3.1  

Dimensions 

The following figure shows device dimensions. The appearance may vary with device 
model.  

Type A                                                                Type B 

Summary of Contents for M-46-FW-V2

















Reviews: