9
housing with the tail cable outlet on the base, attach the housing gently and then
rotate clock/counterclockwise at least 8 degrees to lock.To ensure proper image
display and illumination effects, make sure the mark (see figure above) is aligned
with the screw hole when installation is complete.
6.
Adjust the monitoring direction. Adjust the monitoring direction, then tighten the
screw.
NOTE!
⚫
Do not adjust monitoring direction by force with the screw fully tightened.
Loosen the screw first.
⚫
For open installation, lead the tail cable out of the open slot on the base plate
first and then fasten the screw.
5
Startup
After you have installed the device, connect one end of the power adapter
(purchased separately) to power supply, and then connect the other end to the
power interface to start up the device.
6
Access Your Camera
1.
Open your Web browser, enter the camera's IP address in the address bar, and then
press
Enter
. The default IP is 192.168.1.13.
