advidia A-200, User Manual, Page: 27 / 104

Advidia A200 User Manual
25 25
Figure 4-5 Setting a Preset
2. Use the PTZ control buttons to move the lens to the desired position.
• Pan the speed dome to the right or left.
• Tilt the speed dome up or down.
• Zoom in or out.
• Refocus the lens.
3. Click to finish the setting of the current preset.
4. You can click to delete the preset.
*Note: You can configure up to 256 presets.
Calling a Preset:
In the PTZ control panel, select a defined preset from the list and click to call the
preset.
Figure 4-6 Calling a Preset
*Note: The following presets are predefined with special commands. You can only
call them but not configure them. For instance, preset 99 is the “Start auto scan”. If
you call the preset 99, the speed dome starts auto scan function.
Table 4-3 Special Presets
Special
Preset
Function Special
Preset
Function
33 Auto flip 93 Set limit stops manually
34 Back to initial position 94 Remote reboot
35 Call patrol 1 95 Call OSD menu
36 Call patrol 2 96 Stop a scan
37 Call patrol 3 97 Start random scan
38 Call patrol 4 98 Start frame scan
39 IR cut filter in 99 Start auto scan
40 IR cut filter out 100 Start tilt scan