5
5.2.1
Quick Add
Follow the wizard to the fourth step. Select the devices to add in the discovered device list, and
then click
Add
.
NOTE!
After the device is added, if wrong username or password message shows in the preview
window, click
in the window toolbar and enter the correct username and password.
5.2.2
Custom Add
1.
Right click in the preview page, click
Menu
>
Camera
>
Camera
.
2.
Click
Custom Add
, enter the IP address and other required information.
3.
Check the status of camera.
means the camera gets online successfully. If the status
icon is grayed out, place your mouse cursor over the icon to view the cause of error. Click
the edit button to modify device information.
NOTE!
•
You can also click
to add a device.
•
Click
Search Segment
to search for devices in a specified network segment.
5.3
Playback
In the preview page, select the desired window, then right click and select
Playback
to play the
recording of the current day.
NOTE!
•
A 7*24 recording schedule is enabled by default. To set a recording schedule manually, right
click and select
Menu
>
Storage
>
Recording
and then set recording type and time based on
your needs.
•
If you choose
Event
type recording, you need to enable the corresponding alarm function and
configure alarm-triggered recording/snapshot first.
6.
Web Login
Before you begin, check that your PC is connected to your NVR through network.
1.
Open the browser on your PC, enter the IP address(192.168.1.30) in the address bar, then
press
Enter
.
2.
In the login page, enter the correct username(admin) and password(123456), then click
Login
.
NOTE!
•
Install the plugin as required at first login. Close your browser during the installation.
•
If you have already changed the IP address and username/password in local operation, please
use them after the change.