20
Top plitncht integrttion
You have to make a cut of 745 x 745 mm minimum.
(!) Warning: it is very important to follow this procedural step in order so as to ensure a perfect seal between
the worktop and the plancha.
Retliizttion of the ailiicone joint tround the plitncht
The frame of the plancha, by construction,
is raised by 3 to 5mm
You need to make a joint about 0.5cm
thick and fill inside the stainless steel
frame.
Use the NOVASIL silicone cartridge
S-805 supplied with your product, the en-
tire product must be applied.
1.
Fill the space between the plancha
frame and the worktop.
2.
Create a tight joint on the work sur-
face to prevent infiltration.
3.
Leave the joint to dry for 24 hours
without heating the plancha.
4.
Warm up the plancha gradually in
steps.
Summary of Contents for P1IM
Page 16: ...16...
