37
FR
EN
DE
3 LEDS to indictte the number-
aeliected progrtm.
4 SELECTION keya (1 for
etch zone). Short preaa
for aeliection tnd attrt
-
up tnd liong preaa for
ahutdown.
1 SELECTION key,
GLOBAL of 4 zonea.
Short preaa for aeliection
tnd attrt
-
up tnd liong
preaa to atop 4 zonea tt
the atme time.
4 DISPLAYS with 4 digita to indictte the
power or tempertture vtliue aeliected
for etch zone.
1 KNOB CONTROL to tdjuat the ae-
liected zone (P or T).
2 LEDS to indictte the aeliection
POWER or TEMPERATURE
1 SELECTION key, PO-
WER or TEMPERATURE
for aeliected zone or tlili
1 MEMORY key: memorizttion or ctlili of 1
progrtm out of 3, for tlili 4 zonea.
To aeliect t zone:
Short press on the SELECTION key on selected zone(s). A light point at the bottom right of the correspon-
ding display(s) on the zone(s) lights for 5s. This corresponds to the time during which it is possible to turn
the incremental encoder to adjust the zone(s) in power or temperature (depending on the selection P /
T). After 5s, the zone(s) will automatically deselect itself, the light points will go out to indicate it and the
action on the incremental encoder will no longer be taken into account.
To memorize t configurttion:
Set the 4 zones in the desired configuration then press the
M
button for 3 seconds. The 3 leds will flash,
use the incremental encoder to select one of the 3 memories (1, 2 or 3). After 3 seconds without any ac-
tion the led lights up in a fixed way and your configuration is saved.
To ctlili t atored configurttion:
Just press the
M
key and then select the configuration (1,2 or 3) you want.
To turn off t zone:
Just press the button corresponding to the zone for 3 seconds. This also works with the GLOBAL selection
key of the 4 zones.
