14
Eliectrictli connection
-
Unscrew the 4 screws of the bottom plate, located under the unit to access the connection terminal
block area.
-
Prepare a sector cable equipped with 5 conductor caps wiring.
Minimum apecificttiona of power corda :
-
Place the cord into the cable clamp and tighten the cable clamp to secure the power cords.
-
Connect the 5 wires of the power cord to the terminal block in accordance with the following diagram.
GLP 8000
H07RNF 5G
-
1,5
Terminal connection cord
according with markings :
L1 (brown)
L2 (black)
L3 (grey)
N (blue)
Ground (green/yellow).
Input Power Cord
Power Cord
Connecting Plate
-
Replace the bottom plate by screwing the 4 screws.
-
You can connect the power cord to a standard three phase plug 400 V +/
-
10% of your electrical
installation.
Summary of Contents for GLP 8000
Page 10: ...10...
