Cleaning and care
14
GB
AFTER SALES SUPPORT
IRE
GB
IRE
00800/78747874
GB
IRE
Attaching the inner tent to the outer tent
If the outer tent and the inner tent are not buttoned together (e.g. after cleaning or drying),
proceed as follows:
1. Spread out the inner tent with the grey underside facing down
(see
fig. A
and
H
).
2. Lay the outer tent on the inner tent so that all entrances
3
/
15
are facing in the
same direction.
3. Connect the loop and pin
13
with one another in the middle of the outer and in-
ner tent.
4. From the middle, connect the loops of the outer tent with the respective pins of the
inner tent in sequence on all four sides of the tent.
You can now set up the tent as described in the chapter “Setting up the tent”.
To unbutton the inner tent and the outer tent, perform the steps in reverse order.
Cleaning and care
NOTICE!
Risk of damage!
Improperly cleaning the tent may damage it.
− Do not use any aggressive cleaners, brushes with metal or
nylon bristles, sharp or metallic cleaning utensils such as
knives, hard scrapers and the like.
− Never wash the tent in the washing machine.
It would be destroyed as a result.
− Never have the tent dry cleaned.
− Only use clean water or a commercially-available tent cleaner
to clean the tent.
1. If applicable, remove any dirt from the outer tent with a damp, soft sponge or cloth
with clean water or a commercially-available tent cleaner before taking the tent
down (see
fig. A
).
2. Let the tent dry completely from the outside.
3. Before you take down the inner tent, sweep it out and, if necessary, remove any
contamination with a damp, soft sponge or cloth using clean water or a commer-
cially-available tent cleaner.
4. Let the inner tent dry completely from the inside.
