Assembly
12
Assembly
NOTICE
Risk of damage!
If you set up the hammock on uneven ground, you may damage the
hammock.
- Before assembling the hammock, make sure the work area is as
level and flat as possible. Remove stones, branches or other
objects that can endanger the stability of the hammock stand.
1. Loosen the hooks
8
of the frame
1
from each other and make sure that both
hooks are pointing upwards (see
Fig. B).
2. Pull the frame
1
completely apart (see Fig. B), making sure that the straps are
inside the frame
13
are inside the frame.
3. Secure the folding joints
15
at the four corners of the frame with the locking pins
9
(see
Fig. C)
4. Put the end caps
3
onto the tube ends at the base of the hammock frame
(see
Fig. D).
5. Insert the mat supports
2
into the pockets on the underside of the hammock at
both ends
13
at both ends of the hammock
4
(see Fig. E).
6. Hang the hammock
4
on the hooks
8
of the frame
1
. The drink holder
11
and the
magazine bag
10
must point downwards (see Fig. F).
The first time you hang up the hammock, it will take some force. Be careful and get
a second person to help you.
When the hammock is clamped into the frame for the first time, it can happen
that the mat hangs very high and tightly in the frame. After the first use, the
fabric gives way and the mat hangs lower in the frame. This also makes it
easier to get started.
7. Unfold the storage net
5
and fasten it with the hook and loop fasteners
12
and
fasten it tightly around the four legs of theframe (see
Fig. G).
8. Place the cushion
6
on the hammock (see Fig. H).
9. Your hammock is now ready for use (see
Fig. I).
