background image

Caring for your stroller

Important information

• 

We recommend storing your stroller indoors to avoid corrosion.

• 

We recommend regular inspection and maintenance of locking 
devices and security of essential components.

• 

Regularly check all parts for wear and tear.  Lubricate if tight with a 
silicone based product.  Do not use spray petroleum lubricants such 
as ‘CRC’.

• 

The fabric is washable.  To clean the liner, we recommend sponging 
with warm soapy water and a mild detergent.  A mild disinfectant may 
be used if desired.

• 

NEVER 

tumble dry.

• 

NEVER

 clean with abrasive, ammonia-based, bleach-based or spirit-

based cleaners.

• 

If the wheels become damaged or worn, discontinue use and replace.

• 

Avoid sun exposure for long periods to prevent fading and damage to 
the fabric.

• 

Avoid submersing the product in salt water.  If you do expose it to salt 
water, ensure you wash the frame (particularly moving parts) in cold 
fresh water. 

• 

NEVER

 wring any fabrics. 

• 

Dry thoroughly before storage. 

• 

Store in a well-ventilated area, away from direct sunlight which could 
damage or fade your car seat. 

• 

Store in a safe place when it is not being used.  Avoid placing heavy 
objects on top of it.

• 

NEVER

 allow the seat to come into contact with corrosive substances 

such as battery acid or petroleum products.

11

Summary of Contents for Extreme Buggy














Reviews: