15
1. Remove the cover.
2.
Remove the muffler screen.
3.
Use a flathead screwdriver to pry the spark arrester
out from the muffler.
4.
Remove the carbon deposits on the muffler screen
and spark arrester using a wire brush.
5.
Install the muffler screen.
6. Install the cover.
6. TROUBLESHOOTING
ENGINE WON’T START
1. Fuel systems
No fuel supplied to combustion chamber.
• No fuel in tank:
Supply fuel.
• Fuel in tank:
Fuel tank cap air vent knob to
OPEN
, fuel
cock
knob
to
ON
.
• Clogged fuel line:
Clean fuel line.
• Clogged
carburetor:
Clean
carburetor.
2. Engine oil system
Oil level Insufficient
• Oil level is low:
Add engine oil.
3. Electrical systems
Poor spark
• Spark plug dirty with carbon or wet:
Remove carbon or wipe spark plug dry.
• Faulty ignition system:
Consult dealer.
4.
Compression insufficient
• Worn out piston and cylinder:
Consult dealer.
GENERATOR WON’T PRODUCE POWER
Safety device (AC) to “OFF”:
Stop the engine, then restart.
Summary of Contents for AKGE-2.2KGE 01
Page 18: ...18 9 WIRING DIAGRAM 2200I 240V...
