DODGE / DURANGO / 2011-12 ADVENT DUAL PLAYER HEADREST VIDEO
© 2012 Advent All rights reserved.
Page 6 of 15
128-9070
C. Install Power Wiring
REMINDER: Disconnect the battery prior to any ground
or harness removal/ tapping to prevent possible vehicle
damage. Once all wiring installation is complete the
battery can be reconnected. If the vehicle is equipped
with an Anti-theft radio, the radio code must be written
down prior to disconnecting the battery cable. The code
must be re-entered when the negative battery cable is
re-installed. Disconnecting the battery may cause
certain vehicle settings to be lost. Manufacturer’s
recommendations for the battery removal should be
followed. Disconnecting the battery is recommended.
Temporarily battery connection may be required at
some points.
1.
Using pliers
attach a red T-Tap to the
Blue/Violet wire of the accessory power socket
harness and a red t-tap to the black wire of the
same harness.(Figure C1)
2.
Make the following connections. (Figure C2)
DVD System Power
Harness
22 Pin Connector
Pin #
Red Wire
Blue/Violet Wire
Black Wire
Black Wire
3.
Secure the power harness fuse assembly to the
factory harness with wire ties. (Figure C3)
D. Mount Control Box and Route Cables
1.
Make all six connections to the control box
using color coded connections including 3A-B
cables (red, white, blue, and black) antennae and
power harnesses. (Figure D1)
2.
Wrap the control box in the supplied foam tape.
(Figure D2)
Figure
C1
Figure
C2
Figure
C3
Figure
D1
Figure
D2
