4
Navigation Interface Operation:
CUE Equipped Vehicles:
To change the OEM radio to Navigation mode press
the Navigation icon on the main screen.
Exit Navigation by pressing the home key on the radio
face (see circled area). The nav will continue to operate
unless you have selected to stop the route or used the
Navigation Exit icon in the Nav application.
MyLink Equipped Vehicles:
If you have installed the switch, the NAV will be selected by
pressing each time to enter or exit the Nav application.
To enter the Nav application from the touch screen, press
the location on the screen noted by the star
for about 2 seconds. This location will work in any screen
or menu. Exit Navigation by pressing the same location again.
NOTE:
When a call is received on Bluetooth the caller
information is displayed on the driver information center
above the steering column, use the SWC controls to answer calls.
