R3267 Series Spectrum Analyzer Operation Manual (Vol.1)
3.3.26 WINDOW Key
3-84
3rd Order Peak
The cursor is displayed at the third order intermodulation distor-
tion (from the highest peak), and is magnified in the center of the
lower screen.
Peak Delta Y
Allows you to set the level difference used for a peak search and
displays the value you entered.
Screen Reset
Displays the upper screen in full-screen mode, and turns the Zoom
function off.
F/T
Displays the Zoom menu, and switches to split-screen display
mode.
A zoom center position cursor and a zero span cursor are dis-
played on the upper screen.
The unit of the upper screen X-axis is in frequency; the unit of the
lower screen X-axis (which represents the zero span) is in time.
Zoom Position
Allows you to set the center position of the zoom.
Zoom Width
(Cannot be used in this mode.)
Zoom on Window
The magnified screen on the lower screen is displayed in full-
screen mode.
Zoom off
Returns full-screen mode to the split-screen display mode.
Peak Zooming
Displays the Peak Zoom menu.
Max Peak
The cursor is displayed at the maximum peak on the trace on the
upper screen, and is magnified in the center of the lower screen.
Next Peak
The cursor is displayed at the second highest peak with respect to
the present peak on the upper screen, and is magnified in the cen-
ter of the lower screen.
3rd Order Peak
The cursor is displayed at the third order intermodulation distor-
tion (from the highest peak), and is magnified in the center of the
lower screen.
Peak Delta Y
Allows you to set the level difference used for a peak search and
displays the value you entered.
Screen Reset
Displays the upper screen in full-screen mode, and returns to the
Window menu.
T/T
Switches to split-screen mode to display the units of the upper and
lower X-axes in time (zero span at the center frequency). You can
set different frequencies using split-screens.
Screen Reset
Displays the upper screen in full screen mode.
