![background image](http://html1.mh-extra.com/html/advantech/wizard-bb-wsk-ref-2/wizard-bb-wsk-ref-2_setup-manual_2858278017.webp)
REFRIGERATION MONITORING KIT
17
ATTACHING THE SENSORS ON THE INTELLIGENT EDGE NODES
The Wzzard™ Mesh Refrigeration Monitoring Kit comes with built-in sensors for ambient
temperature and humidity, along with two AC current sensors, a door switch, and a breakout
cable with 10K thermistor.
1. Plug the Breakout/Thermistor Cable into the Molex connector on the bottom of the Wzzard
Mesh node.
2. Plug the door sensor into the 2-pin connector on the breakout cable.
3. Connect the sensors for compressor and fan current to the bare wires on the breakout
cable.
Sensor
Breakout Cable
Connection
Compressor
Current
Sensor (+) to Stripped & Tinned Cable
AIN1 RED
Sensor (-) to Stripped & Tinned Cable
AIN1 BLACK
Fan
Current
Sensor (+) to Stripped & Tinned Cable
AIN2 YELLOW
Sensor (-) to Stripped & Tinned Cable
AIN2 BLACK
Current Sensors
1. Open the wire protector clamp by pushing it away from the sensor body.
2. Attach your wires.
3. Close the wire protector clamp.
Summary of Contents for Wizard BB-WSK-REF-2
Page 1: ...Wzzard Mesh Gen2 Starter Bundles Refrigeration Monitoring Kit Model BB WSK REF 2 SETUP MANUAL...
Page 6: ...REFRIGERATION MONITORING KIT 6 4 Select Add Upgrade Apps tab...
Page 8: ...REFRIGERATION MONITORING KIT 8 6 Click OK to accept the download...
Page 9: ...REFRIGERATION MONITORING KIT 9 7 Click Add Upgrade Selected to start the download...