Advantech WISE-1510, User Manual

Page: 44 / 68

WISE-1510 User Manual 34
5.1 CLI Command Description
The parameters settings on WISE-3610 and WISE-1510 need to be the same.
Before you had your own solution on WISELink, you can try to change the WISELink
solution via CLI command.
There are 13 parameters to establish the WISE-3610 and WISE-1510 links which
includes Beacon(DevOpMode), Device EUI(DevEUI), App EUI(AppEUI), App
Key(AppKey), Device Class(Devclass), Activation(DevActMode), App Key(AppKey),
NetWork ID(DevNetID), Data Rate(DevAdvwiseDataRate), Channel Fre-
quency(DevAdvwiseFreq), Device Address(DevAddr), Network Session Key(NwkS-
Key) and Application Session Key(AppSKey).
In this section, we will guide you to do the settings with each solution which are
WISELink 1.0 with Class A ABP, WISELink 1.0 with Class C ABP, WISELink 2.0 with
Class A OTAA and WISELink 2.0 with Class C OTAA. Each solution needs to adjust
some parameters both on WISE-1510 and WISE-3610. Please check the following
table for the detail parameter description.
Command Option Parameters Description
node get/set --AppEUI Application EUI for OTAA mode
--BKey Broadcast key
--AppKey
Application key for OTAA mode (16
Digit)
--DevAddr Device Addr for ABP mode
--NwkSKey
Network session key for ABP mode
(32 Digit)
--AppSKey
Application session key for ABP
mode (32 Digit)
--DevNetId Device Net ID for WISE mode
--DevActMode
Activation mode
(1:OTAA| 2:ABP; Default:1)
--DevOpMode
Device operating mode
(1:WISELink 1.0 | 2:LoRaWAN |
4:WISELink 2.0; Default:4)
--DevAdvwiseFreq Frequency Band
--DevAdvwiseDataRate Data Rate
--DevAdvwiseTxPwr RF Transmit Power (dbm)
savecfg Save all changes to the WISE-1510
reboot Reboot WISE-1510
Command example Description
Example 1 node get --AppEUI Get AppEUI parameter
Example 2 node set --DevAddr 11111111 Set DevAddr is 11111111
Example 3 node savecfg Save all changes to the WISE-1510
Example 4 node reboot Reboot WISE-1510