background image

VITA-35

0

 User Manual

iv

根據交通部低功率管理辦法規定:

第十二條
經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不
得擅自變更頻率、加大功率或變更原設計之特性及功能。

第十四條
低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾
現象時,應立即停用,並改善至無干擾時方得繼續使用。前項合法通信,
指依電信規定作業之無線電信。低功率射頻電機須忍受合法通信或工業、
科學及醫療用電波輻射性電機設備之干擾。

 
FCC

This device complies with the requirements in part 15 of the 
FCC rules: Operation is subject to the following two condi-
tions:

1.This device may not cause harmful interference, and

2. This device must accept any interference received, includ-
ing interference that may cause undesired operation

This equipment has been tested and found to comply with the 
limits for a Class A digital device, pursuant to Part 15 of the 
FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference when the equipment 
is operated in a commercial environment. This equipment 
generates, uses, and can radiate radio frequency energy 
and, if not installed and used in accordance with the instruc-
tion manual, may cause harmful interference to radio commu-
nications. Operation of this device in a residential area is 
likely to cause harmful interference in which case the user will 
be required to correct the interference at his/her own 
expense. The user is advised that any equipment changes or 
modifications not expressly approved by the party responsi-
ble for compliance would void the compliance to FCC regula-
tions and therefore, the user's authority to operate the 
equipment. 

Caution!

There is a danger of a new battery exploding if it is incorrectly 
installed. Do not attempt to recharge, force open, or heat the 
battery. Replace the battery only with the same or equivalent 
type recommended by the manufacturer. Discard used batter-
ies according to the manufacturer’s instructions.

Summary of Contents for VITA-350











































































Reviews: